20000mAh/600A Car Jump Starter Power Pack Portable Car Battery Booster Charger 12V Starter Diesel Gasoline Car Emergency Starter
product description:
Diesel and gasoline double start, strong start: small size, large capacity, starting current up to 600A.
20000mAh large capacity, large displacement: specially designed for car startup, large-capacity batteries are matched with a static 0.05mA low-function sleep solution, and the battery can be maintained without long-term use.
Fast charging of mobile phone digital devices: Dual USB charging ports support 18W, and the battery life of mobile phones can be fixed in the first line.
Power LED indicator: It comes with a power indicator, and the remaining power is clear at a glance.
LED lighting, SOS rescue: bright and long-distance, a good companion for camping and sleeping.
Start at low temperature, not afraid of severe cold: strong adaptability, low temperature resistance -40℃, high temperature resistance 85℃.
Battery capacity: 20000mAh
Battery cycle life: ≥3000 times
Peak current: 600A
Starting current: 300A
Car start output: 12V
DC output: 12V-16V/8A
USB output: 5V/2.1A
Gas engine rating: up to 6.0L
Working temperature: -40℃-85℃
packing list:
1*Starter
1*clip
1*tool box
2*charger
1*Instruction
1*USB data cable
▶Operation method:
1. Before starting the car, please make sure that the host has at least 2 LED indicators on, then insert the blue plug fully into the host socket, and confirm that the cable indicator is off
2. Connect the red clip to the positive (+) battery terminal and the black clip to the negative (-) battery terminal
3. Start the vehicle
4. After the vehicle is started, remove the clip from the battery. (It is recommended to remove the clip within 30 seconds)
▶Function description of flashlight:
Highlight lighting: long press the function key
SOS Rescue: Double-click the function key
Flashing prompt: double-click the function key again
▶Notes:
1. Remove the host within 30 seconds after starting the car.
2. Do not clamp the two terminals on the same end of the battery.
3. Press the switch for five seconds to start. If you want to use LED for lighting, press the switch to change the selected state (light, strobe, SOS, off).
4. During the charging process, slight heating of the device is normal and not a malfunction.
5. Store the product in a cool and dry place, away from direct sunlight.
The product cannot be charged:
1. Check whether you are using our charger (15/1A) and whether the charger indicator is on.
2. For models with no count display, when the charger is connected, whether the battery light flashes normally and whether the battery level is rising.
3. If there is an on-board charger, use the on-board charger to charge the car for a while and observe whether the battery level rises. Check whether the problem is with the home charger or the host.
Q: Will your product explode during use, or will the battery swell?
Answer 1: Correct operation will not explode or battery swell.
Answer 2: It is not improper operation. For example, the positive and negative poles of the clamp are connected reversely, the clamp is not fully clamped, the forced start is too large, or the forced start of a large displacement vehicle may cause the battery to burst or swell, but it will not cause spontaneous combustion. Or explode. If you do not understand the instructions, please contact us
Question: Why does the battery clamp burn and melt?
This is because the battery bears a high-intensity load, and the clamp is connected to the battery for too long, which causes the continuous start or forced start of the large-displacement car. There will be no safety issues, but it cannot be used again.
Note: In order for your car to start smoothly, please make sure that the power of the car is above two bars every time you start the car!
USB 2.1A Fast charging
can charge various elec tronic products
Dual usb interface
Emergency Multi-mode led flashlight
Automatic identification easire to identify problems
powerful 600Ajump starer
Power bank /jump starer/ led light
Follow us on: